Current position: Home > Products > Index 1101
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9 All

· 0.015UF100VDC1206

Description: Note 1: Gain error tested at VREF = +2.0V, +2.5V, and +3.0V (MAX5143/MAX5144) or VREF = +2.0V, +2.5V, +3.0V, and +5.0V (MAX5141/MAX5142). Note 2: ROUT tolerance is typically 20%. Note 3: Min/max range guaranteed by gain-error test. Operation outside min/max limits will result in degraded pe...

Applications: The SN74AVCB324245 is designed for asynchronous communication between data buses. The device transmits data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE) input can be used to disable the o...

Features: Each I/O cell drives a unique pin. The OE control for each I/O pin is independent and may be driven via the GRP by one of the designated I/O pins (I/O-OE set). The I/O-OE set consists of 25% of the total I/O pins. Boundary Scan test is supported by dedicated registers at each I/O pin. In...

· 0.015UF50VDC1206

Description: DESCRIPTION The 74V1T77 is an advanced high-speed CMOS SINGLE D-TYPE LATCH fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology. It is designed to operate from 4.5V to 5.5V, making this device ideal for portable applications. The single D-Type latch ...

Applications: 0.015UF50VDC1206 is a precision three-port isolated instrumenta- tion amplifier incorporating a novel duty cycle modu- lation-demodulation technique and has excellent accu- racy. Internal input protection can withstand up to 40V input differential without damage. The signal is transmitte...

Features: The LCX74 is a dual D-type flip-flop with Asynchronous Clear and Set inputs and complementary (Q, Q) outputs. Information at the input is transferred to the outputs on the positive edge of the clock pulse. After the Clock Pulse input threshold voltage has been passed, the Data input is l...

· 0.01F

Description:

Applications: These regulators include reverse voltage sensing that prevents current in the reverse direction. Quiescent current is always less than 650 µA. These devices have been internally compensated in such a way that the need for a minimum output capacitor has been eliminated.

Features: 1. Surface mount product is taped and reeled in accordance with EIA-481. 2. Suffix-T7 = 7 Inch Reel - 1,000 pieces per 12mm tape, i.e., 0.01F-T7. 3. Suffix-T13 = 13 Inch Reel - 2,500 pieces per 12mm tape, i.e., 0.01F-T13. 4. No Suffix = Product Shipped in Tubes of 98 pcs per Tube.

· 0.01UF250VDC18125

Description: - Micropower operation - 2.5V to 5.5V battery operation - Offset Canceling Technology - Superior temperature stability - Extremely Low Switch-Point Drift - Insensitive to Physical Stress - -40C to 85C operating temperature - Low profile 3 pin SIP/SOT23 package

Applications: The LPC47M14x has incorporated the following Super I/O components: a parallel port that is compatible with IBM PC/AT architecture, as well as the IEEE 1284 EPP and ECP; two serial ports that are 16C550A UART compatible; a keyboard/mouse controller that uses an 8042 microcontroller; two floppy ...

Features: 0.01UF250VDC18125/FA/FB is a single-chip processor which incorporates the following functions: sync separation protection, interpolation, EFM decoder, error correction, micro controller interface, digital equalizer for use in servo LSI, and servo control circuit. 0.01UF250VDC18125/FA/FB ...

· 0.022UF630VDC282410

Description: • Multi-standard VBI data slicer decoding World Standard Teletext (WST), North-American Broadcast Text System (NABTS), Closed Caption (CC), Wide Screen Signalling (WSS), Video Programming System (VPS), Vertical Interval Time Code (VITC) variants (EBU/SMPTE) etc.

Applications: Efficient 16-bit 56800E family controller engine with dual Harvard architecture Up to 60 Million Instructions Per Second (MIPS) at 60MHz core frequency Single-cycle 16 16-bit parallel Multiplier-Accumulator (MAC) Four 36-bit accumulators, including extension bits Arithmetic and logic mu...

Features: data to be loaded into the shift register following the start bit) A logic 1 at the input will turn on the corresponding display digit segment dot output A significant reduction in discrete board components can be achieved by use of the 0.022UF630VDC282410 because external pull- down resi...

· 0.022UF630VDC28245

Description: The 0.022UF630VDC28245 has two kinds of power supply pins: • VDDCORE pins, which power the chip core • VDDIO pins, which power the I/O lines This allows core power consumption to be reduced by sup- plying it with a lower voltage than the I/O lines. The VDDCORE pins must neve...

Applications: Continuous Drain Current, VGS @ 10V Continuous Drain Current, VGS @ 10V Pulsed Drain Current  Power Dissipation Linear Derating Factor Gate-to-Source Voltage Single Pulse Avalanche Energy‚ Avalanche Current Repetitive Avalanche Energy Peak Diode Recovery d...

Features: The 0.022UF630VDC28245 contains a clock-driver circuit that distributes one input signal to six outputs with minimum skew for clock distribution. Through the use of the polarity-control (T/C) inputs, various combinations of true and complementary outputs can be obtained. The output-enable (...

· 0.027UF250VDC18125

Description: Following the address and acknowledge bit with logic 0 in the read/write bit, the first byte written is the command byte. If the command byte is reserved and therefore not valid, it will not be acknowledged. Only valid command bytes will be acknowledged.

Applications: ‧SOP package 4 Pin type in miniature design (4.44.32.0mm / .173.169.083inch) ‧Low driver power requirements (TTL/CMOS Compatible) ‧High reliability ‧Arc-Free with no snubbing circuits ‧1500Vrms Input/Output isolation ‧Tape & Reel version available

Features: Inputs to VID D to A Converter Inputs to VID D to A Converter Connect a resistor to VOSNS- to program oscillator frequency and FB, OCSET, BBFB, and VDAC bias currents Remote Sense Input. Connect to ground at the Load. Programs the hiccup over-current threshold through an external resisto...

· 0.033UF630VDC282455

Description: The bi-polar long-term timer U6046B is designed to automatically limit the operation time of high loads in the harsh automotive enviroment with a preset delay time. With the power-on-reset function the timers guarantee that current consuming devices are not operated unintentionally.

Applications: The design of the main power inductor in a switching power supply provides many challenges to the engineer. Not only must an inductance value be chosen, but also how much cur- rent the inductor can handle, the winding resistance, mechanical factors, etc. This Application Bulletin looks at...

Features: The HYM72V16M636T6 Series are 16Mx64bits Synchronous DRAM Modules. The modules are composed of four 16Mx16bits CMOS Synchronous DRAMs in 400mil 54pin TSOP-II package, one 2Kbit EEPROM in 8pin TSSOP package on a 168pin glass-epoxy printed circuit board. Two 0.33uF and one 0.1uF decoupling capac...

· 0.047UF50VDC12105

Description: 1) CPD is defined as the value of the ICs internal equivalent capacitance which is calculated from the operating current consumption without load. (Refer to Test Circuit). Average operating current can be obtained by the following equation. ICC(opr) = CPD x VCC x fIN + ICC/2(per circuit)

Applications: internal current-control circuitry (or by the PHASE or ENABLE inputs). The comparator output is blanked to prevent false over-current detections due to reverse- recovery currents of the clamp diodes, and/or switching transients related to distributed capacitance in the load.

Features: Operation With 3.3 V I/Os and Supplies2 Reduced Ground Bounce Using Time Staggered Pixel Outputs Lowest Noise and Best Power Dissipation Using TI PowerPAD Packaging Advanced Technology Using TI 0.18-µm EPIC-5 CMOS Process 0.047UF50VDC12105A Incorporates HSYNC Jitter I...

· 0.056UF100V1812

Description: A block diagram illustrates the IC's internal structure (Figure 3a and 3b). A patented sensor- bridge excitation circuit counteracts any decrease in sensitivity by causing the bridge-drive voltage to rise with temperature. The compensated sensor bridge also acts as a temperature sensor, and ...

Applications: see BAT15-013 see BAT15-013 see BAT15-013 see BAT15-013 see BAT15-013 see BAT15-013 see BAT15-013 see BAT15-013 see BAT15-013 see BAT15-013 see BAT15-013 see BAT15-013 see BAT15-013 see BAT15-013 see BAT15-013 see BAT15-013 see BAT15-013

Features: The Hynix 0.056UF100V1812 Series are 16Mx72bits ECC Synchronous DRAM Modules. The modules are composed of nine 16Mx8bits CMOS Synchronous DRAMs in 400mil 54pin TSOP-II package, one 2Kbit EEPROM in 8pin TSSOP package on a 168pin glass-epoxy printed circuit board. One 0.22uF and two 0.0022uF dec...

· 0.068UF100VDC18125

Description: Right Hand Decimal Point 1. Overflow Character • Categorized for Luminous Intensity Yellow and Green Categorized for Color Use of Like Categories Yields a Uniform Display • High Light Output • High Peak Current • Excellent for Long Digit String Mult...

Applications: Data Bus, active High. In word mode, these pins provide a 16-bit data path Inputs/Outputs for read and write operations. In byte mode, DQ[7:0] provide an 8-bit data path Tri-stateand DQ15/A-1 is used as the LSB of the 20-bit byte address input. DQ[14:8] are unused and remain tri-stated ...

Features: Absolute maximum continuos ratings are those maximum values beyond which damage to the device may occur. Exposure to these conditions or conditions beyond those indicated may adversely affect device reliability. Functional operation at absolute-maximum-rated conditions is not implied.

· 0.1UF

Description: Because of the true 4 quadrant method of output switching, the output switches will PWM between the ICOMMAND POSITIVE and ICOMMAND NEGATIVE states, with the average percentage based on ICOMMAND being a positive voltage and a negative voltage. With a zero voltage ICOMMAND, the output switc...

Applications: The unclamped inductive switching circuit shown in Figure 10 was used to demonstrate the controlled avalanche capability of this device. A mercury switch was used instead of an electronic switch to simulate a noisy environment when the switch was being opened. When S1 is closed at t0 th...

Features: The EB-2100x accommodates either a coaxial or an optical S/PDIF digital audio interface. Either input may be selected by moving jumper J2. Connect J2 pins 1-2 for coaxial or J2 pins 2- 3 for optical S/PDIF. A Crystal CS8415A digital audio interface receiver is utilized to convert the incomin...

· 0.1UF100V

Description: NOTE 4: Apply a −1 dBFS 10-KHz triangle wave at AIN+ and AIN− with an internal bandgap reference and ADC reference enabled, and BIASREF enabled at AVDD/2. Any additional load at BIASREF or VREF may require additional current. NOTE 5: Wake-up time is from the power-down state to ...

Applications: Voltage range specified in the Output Stage of the Electrical Characteristics in boldface type. For VIN 4.5 V, a RESET = Low may occur with the output in regulation. Part is guaranteed by design to meet specification over the entire VIN voltage range, but is production tested only at the sp...

Features: Notes : 1. A Retriggerable one-shot multivibrator has an output pulse width which is extended on full time period (T) after application of the last trigger pulse. 2. A Non-retriggerable one-shot multivibrator has a time period (T) referenced from the application of the first trigger pulse.

· 0.1UF-35V

Vendor:114   Package Cooled:N/A   D/C:N/A   

Description: During turn-off of the lower MOSFET, the LGATE voltage is monitored until it reaches a 1.0V threshold, at which time the UGATE is released to rise. Adaptive shoot-through circuitry monitors the PHASE voltage during UGATE turn-off. Once PHASE has dropped below a threshold of 0.5V, the LGAT...

Applications: NOTES: 1. Measured with outputs open. 2. Refresh period is 64ms. 3. Internal TCSR can be supported(In commercial Temp : Max 40C/Max 70C). 4. 0.1UF-35V-Y(P)C** 5. 0.1UF-35V-Y(P)L** 6. 0.1UF-35V-Y(P)F** 7. Unless otherwise noted, input swing IeveI is CMOS(VIH /VIL=VDDQ/VSSQ).

Features:

· 0.1UF63VDC

Description: This pin is internally connected to the inverting input of the PWM comparator. For stable operation, a capacitor should be placed between this pin and GND. If the voltage of this pin reaches 7.5V, the over load protection is activated resulting in shutdown of FPS.

Applications: The dead-time generator monitors the DIRECTION input and inhibits the outputs (pins 11 thru 16) for a time sufficient to prevent current-spiking in the external power switches when the direction is reversed The six chip outputs drive external power switching devices which drive the motor ...

Features: 524,288-word by 8-bit CMOS static RAM. The IS61LV5128 is fabricated using ISSI's high-performance CMOS tech- nology. This highly reliable process coupled with innova- tive circuit design techniques, yields higher performance and low power consumption devices.

· 0.22UF50VDC181210

Description: 62 powerful instructions Up to 1ms instruction cycle with 4MHz system clock All instructions in 1 or 2 machine cycles 14-bit table read instructions One-level subroutine nesting Bit manipulation instructions 20-pin SOP-A/DIP-A package 24-pin SOP-A package

Applications: Designed for 802.16 WiBro and dual mode applications with frequencies from 2300 to 2400 MHz. Suitable for Class AB feedforward and predistortion systems. • Typical 2 - Carrier W - CDMA Performance: VDD = 28 Volts, IDQ = 1000 mA, Pout = 20 Watts Avg., Full Frequency Band, Channel Ban...

Features: Built-in low-voltage detection circuit. Prevents incorrect operations and writing errors in the EEPROM during drops in power voltage. An external LVD must be used to assert reset at power supply voltage below 4.5 V if Neuron Chip is operated at 20 MHz.

· 0.25W50PPM2EM1833K

Description: 1. Obtaining fully specified performance from the ADS-119 requires careful attention to pc-card layout and power supply decoupling. The device's analog and digital ground systems are connected to each other internally. For optimal performance, tie all ground pins (14, 18, and 23) dire...

Applications: The 0.25W50PPM2EM1833K supports program execution from internal memories. Two data operands can be accessed from the on-chip data RAM per instruction cycle. The 0.25W50PPM2EM1833K also provides two external dedicated interrupt lines and up to 49 General Purpose Input/Output (GPIO) lines, de...

Features: Maximum Charge Current Charge Current Load Dependency Trickle Charge Current Trickle Charge Threshold Voltage Input Charger Enable Threshold Voltage Output Charger Enable Threshold Voltage Input/Output Undervoltage Current Limit Recharge Battery Threshold Voltage TIMER Accuracy Recharg...

· 0.33UF50V

Description: In the 3-to-8 decoding or demultiplexing mode, the addressed output follows the state of the (D) input with all other outputs in the LOW state. In the reset mode all outputs are LOW and unaffected by the address (A0 to A2) and data (D) input. When operating the 259 as an address latch, ...

Applications: General Note: Devices are ESD protected, however, handling precautions recommended. Note *: Off is 1.0 and on is 2.4V for the 0.33UF50V-1. Off is 2.4V and on is 1.0V for the 0.33UF50V-2. The enable input has approximately 200mV of hysteresis. See control threshold charts.

Features: The Micron® Imaging 0.33UF50V is a QXGA-format 1/2-inch CMOS active-pixel digital image sensor with an active imaging pixel array of 2,048H x 1,536V. It incorporates sophisticated camera functions on-chip such as windowing, column and row skip mode, and snapshot mode. It is programma...

· 0.47UF250V

Description: HIGH SPEED: tPD = 3.5ns (TYP.) at VCC = 5V LOW POWER DISSIPATION: ICC = 1µA(MAX.) at TA = 25C HIGH NOISE IMMUNITY: VNIH = VNIL = 10% VCC (MIN.) POWER DOWN PROTECTION ON INPUT SYMMETRICAL OUTPUT IMPEDANCE: |IOH| = IOL = 8mA (MIN) at VCC = 4.5V BALANCED PROPAGATION DELAYS: tPL...

Applications: The MAX7447 4-channel, buffered video reconstruction filter is ideal for anti-aliasing and DAC-smoothing video applications or wherever analog video is reconstructed from a digital data stream (such as cable/satellite/ter- restrial set-top boxes, DVD players, hard disk recorders (HDRs), and p...

Features: The TC55V8512JI/FTI is a 4,194,304-bit high-speed static random access memory (SRAM) organized as 524,288 words by 8 bits. Fabricated using CMOS technology and advanced circuit techniques to provide high speed, it operates from a single 3.3 V power supply. Chip enable ( CE ) can be used to p...

· 0.47UF250VDC40305

Description: No word address occurs for a read operation, though the 3-bit page select is latched internally. Reads always use the lower 8-bits that are held internally in the address latch. That is, reads always begin at the address following the previous access. A random read address can be loaded...

Applications: A 11-bit program counter (PC) stores addresses for instruction fetch during program execution. Usually, the PC is incremented by the number of bytes of the instruction being fetched. An exception is the 1-byte instruction REF which is used to reference instructions stored in a look-up table ...

Features: A buffered output-enable (OE) input can be used to place the eight outputs in either a normal logic state (high or low logic levels) or a high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased...

· 0.5W10V

Vendor:COS   Package Cooled:DO-35   D/C:07+   

Description: The outstanding Vitesse web managed switch software system that runs on a standard 8051 controller, is provided. This is in addition to the unmanaged and smart managed software systems for 8051, which are also included. For homegrown software development our full switch API is supplied.

Applications: Once fired, the outputs are independent of further transitions of the A and B inputs and are a function of the timing components, or the output pulses can be terminated by the overriding clear. Input pulses can be of any duration relative to the output pulse. Output pulse length can be vari...

Features: The Hynix 0.5W10V Series are Dual In-line Memory Modules suitable for easy interchange and addition of 64Mbytes memory. The Hynix 0.5W10V Series are fully synchronous operation referenced to the positive edge of the clock . All inputs and outputs are synchronized with the rising edge of the c...

· 0.5W110V

Description: Purchase of licensed I2C components of Analog Devices or one of its sublicensed Associated Companies conveys a license for the purchaser under the Philips I2C Patent Rights to use these components in an I2C system, provided that the system conforms to the I2C Standard Specification as defin...

Applications: • Compact disk player (CDP) with tray and changer • Compact disk player (VCD) with tray and changer • Automotive compact disk player (CDP) with tray and changer • Mixing with compact disk player (CDP) and mini disk player (MD) with tray and changer • Other...

Features: The 0.5W110V transmitter converts 28 bits of 3.3 V CMOS/TTL into 4 Low Voltage Differential Signaling (LVDS) data streams while the transmit clock input is transmitted in parallel with the data streams over a fifth LVDS link. The 0.5W110V can be programmed for rising edge or falling edge cloc...

· 0.5W11V

Description: VI TELEFILTERVectron International, Inc. Potsdamer Straße 18267 Lowell Road D 14 513 TELTOW / GermanyHudson, NH 03051 / USA Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.comE-Mail: vti@vtinh.com VI TELEFILTER reserves...

Applications: This document is a general product description and is subject to change without notice. Hyundai electronics does not assume any responsibility for use of circuits described. No patent licences are implied Hyundai Semiconductor Rev.00 / Sep.97

Features: It is designed specifically for human interfaces, like control panels, appliances, toys, lighting controls, or anywhere a mechanical switch or button may be found; it may also be used for some material sensing and control applications provided that the presence duration of objects does not e...

· 0.5W120V

Description: also be used independent of the HALT or IDLE modes Each I O pin has software selectable configurations The device operates over a voltage range of 2 5V to 6V High throughput is achieved with an efficient regular instruction set operating at a maximum rate of 1 ms per instruction

Applications: !Features In addition to the features of regular digital transistors. 1) Low saturation voltage, typically VCE (sat) =40mV at IC / IB=50mA / 2.5mA, makes these transistors ideal for muting circuits. 2) These transistors can be used at high current levels, IC=600mA.

Features: Supply Voltage.-0.3V to 6.5V Voltage at any Pin.-0.3V to +Vs +0.3V Input Current at any Pin.5mA Package Input Current.20mA O.S. Output Sink Current.10mA O.S. Output Voltage...6.5V Storage Temperature-65C to +150C Soldering Information, Lead Temperature SOP Package Vapor Phase (60 seconds)...

· 0.5W12V

Vendor:COS   Package Cooled:DO-35   D/C:07+   

Description: Single Read Accesses A read access is initiated when the following conditions are satisfied at clock rise: (1) CEN is asserted LOW, (2) CE1, CE2, and CE3 are ALL asserted active, (3) the Write Enable input signal WE is deasserted HIGH, and (4) ADV/LD is asserted LOW. The address presented to...

Applications: • Layer 2 priority encoding (802.3p) (up to 16 priority queues) • VLAN tagging (IEEE 802.3q) • Flow control (IEEE 802.3x) • Link aggregation (IEEE802.3ad) • Multiple power modes with programmable low power operation • Low power design C 3.3 V/1.8 V, 0.18 ...

Features: drivers to drive either 3.3V or 2.5V output levels while the device logic and the output current drive is always pow- ered from 3.3V. The output drivers also provide individually programmable edge rates and open drain capability. A programmable pullup resistor is provided to tie off un- ...

· 0.5W15V

Vendor:COS   Package Cooled:DO-35   D/C:07+   

Description: 2.5 VDD 6 differential outputs Low skew: 100ps all outputs Selectable positive or negative edge synchronization Tolerant of spread spectrum input clock Synchronous output enable Selectable inputs Input frequency: 4.17MHz to 250MHz Output frequency: 12.5MHz to 250MHz 1.8V / 2.5V LVTTL:...

Applications: The total synthesized voice contents (2.8 sec- onds) can be partitioned into the desired num- ber of sections depending on the size of the ROM table. The length of each section is de- cided by the requirements of the voice con- tents. For example:

Features: Clocks in the ispLSI 1048 device are selected using the Clock Distribution Network. Four dedicated clockpins (Y0, Y1, Y2 and Y3) are brought into the distribution network, and five clock outputs (CLK 0, CLK 1, CLK 2, IOCLK 0 and IOCLK 1) are provided to route clocks to the GLBs and I/O ...

· 0.5W18V

Description: A 5% resistor value is recommended. In the OOK mode, this pin is usually driven with a logic-level data input (unshaped data pulses). OOK modulation is practical for data pulses of 200 µs or longer. In the ASK mode, this pin accepts analog modulation (shaped or unshaped data pulses). ASK...

Applications: Analog-for-the-Digital Age, Application Maestro, dsPICDEM, dsPICDEM.net, dsPICworks, ECAN, ECONOMONITOR, FanSense, FlexROM, fuzzyLAB, In-Circuit Serial Programming, ICSP, ICEPIC, MPASM, MPLIB, MPLINK, MPSIM, PICkit, PICDEM, PICDEM.net, PICLAB, PICtail, PowerCal, PowerInfo, PowerMate, Po...

Features: Chip Select (CS) When CS is high, the 0.5W18V/45 is deselected and the SO output pin is at high impedance and, unless an internal write operation is underway, the 0.5W18V/45 will be in the standby power mode. CS low enables the 0.5W18V/45, placing it in the active power mode. It should ...

· 0.5W19V

Description:

Applications: The SC16C654B/654DB is pin compatible with the ST16C654 and TL16C754 and it will power-up to be functionally equivalent to the 16C454. Programming of control registers enables the added features of the SC16C654B/654DB. Some of these added features are the 64-byte receive and transmit FIFOs,...

Features: Thus when the voltage across the inductor is positive (State 1), the inductor current increases; when the voltage across the inductor is negative (State 2), the inductor current decreases. The net current through the inductor is shown in Figure 2:

· 0.5W2.1V

Description: Notes: 1. Typical continuous power in a non-ventilated enclosed adapter with sufficient drain pattern as a heat sinker, at 50C ambient. 2. Maximum practical continuous power in an open frame design with sufficient drain pattern as a heat sinker, at 50C ambient. 3. 230 VAC or 100/115 V...

Applications: Supply Voltage High Gain Idle Current Low Gain Idle Current VREG Current VMODE Current RF Turn On/Off Time DC Turn On/Off Time Total Current (Power Down) VREG Low Voltage VREG High Voltage (Recommended) VREG High Voltage (Operational) VMODE Voltage

Features: The PWM range is set via two inputs that control the starting and ending point of the conversion range. For example, if the capacitance range of Cx is from 27pF to 38pF, the 0.5W2.1V can be calibrated so that the PWM zero point occurs at 27pF, and the endpoint (255) occurs at 38pF. In this ...

· 0.5W2.2V

Description: 1.5 LAN feature set 1 Ethernet 10/100 MII (HPNA compatible) 2 UARTs, Bluetooth compatible Bridging: Transparent bridge: IEEE 801.1d, spanning tree, learning/filter bridge in hardware Embedded router: RIP1, RIP2, static routing NAT/PAT with extended ALG support DHCP server/client...

Applications: Advanced Process Technology Ultra low On-Resistance Provides Higher Efficiency Avalanche Energy Specified Source-to-Drain Diode Recovery Time Comparable to a Discrete Fast Recovery Diode Diode is Characterized for Use in Bridge Circuits IDSS and VDS (on) Specified at Elevated Temperature

Features: These pins switch the ICs operating state from active (S0, S1/S2) to S3 and S4/S5 sleep states. These are digital inputs featuring internal 10µA pull down current sources on each pin. Additional circuitry blocks illegal state transitions, such as S4/S5 to S3. Connect S3# and S5# to the c...

· 0.5W2.4V

Vendor:COS   Package Cooled:DO-35   D/C:07+   

Description: 1. Stresses above those listed under the Absolute Maximum Ratings may cause permanent damage to the device. Functional operation of the device at these or at any other conditions above those indicated in the operational sections of this specifica tion is not implied (while programming, fo...

Applications: The ISL9V2040D3S, ISL9V2040S3S, and ISL9V2040P3 are the next generation ignition IGBTs that offer outstanding SCIS capability in the space saving D-Pak (TO-252), as well as the industry standard D²-Pak (TO-263) and TO-220 plastic packages. This device is intended for use in automotiv...

Features: a. Absolute maximum continuous ratings are those maximum values beyond which damage to the device may occur. Exposure to these conditions or conditions beyond those indicated may adversely affect device reliability. Functional operation under absolute-maximum-rated conditions is not implied.

· 0.5W2.7V

Description: With 1mA load With 1mA load With 20pF maximum load capacitance mea- sured from 10% to 90% of output voltage Output at (VDD -0.3V) Output at 0.3V MCLK can be driven DC-coupled by a CMOS clock oscillator with rail-to-rail out- puts. Other oscillator configurations may require AC-coup...

Applications: Notes: 1. SSSEL has internal pull-up and SSON has pull-down resistors. 2. In applications if a crystal is used for the input reference clock, refer to crystal manufacturers specifications for the required crystal load capacitor value. 3. Parameters are guaranteed by design and characterizat...

Features: • Interfaces directly to a single-scan panel monochrome STN LCD • Interfaces to a single-scan panel color STN LCD with minimal external glue logic • Panel width size is programmable from 32 to 1024 pixels in 16-pixel increments • Video frame buffer size programm...

· 0.5W20V

Description: Resistors R1 and R2 set the nominal Under-Voltage (UV) lockout and Overvoltage (OV) shutdown limits to 84 V and 378 V, respectively. UV lockout protects the supply from overheating at low line and eliminates power-up and power- down glitches. OV shutdown protects the power supply from li...

Applications: The 0.5W20V is the most featured and flexible product for those venders who are looking for USB Keyboard with Hub solution. Besides, vendors can easily modify their board circuits to meet their own requirement if they have product differentiation or cost issues. Further more, if vendor has t...

Features: The 0.5W20V is an Erasable Programmable Logic Device (EPLD) in which CMOS EPROM cells are used to configure logic functions within the device. The MAX® architecture is 100% user-configurable, allowing the devices to accom- modate a variety of independent logic functions.

· 0.5W24V

Description: 24421-009-DTS Rev ADQ# 2009 All technical information is believed to be accurate, but no responsibility is assumed for errors or omissions. Interpoint reserves the right to make changes in products or specifications without notice. HR300 Series is a trademark of Interpoint. Copyright &cop...

Applications: NOTES:- 1. Derate linearly above 70oC free air temperature at a rate of 0.8 mA/C. 2. Derate linearly above 70oC free air temperature at a rate of 1.6 mA/C. 3. Derate linearly above 70oC free air temperature at a rate of 0.9 mW/C. 4. Derate linearly above 70oC free air temperature at a rate...

Features: Depth expansion is possible using the cascade input (XI), cascade output (XO), and First Load (FL) pins. The XO pin is connected to the XI pin of the next device, and the XO pin of the last device should be connected to the XI pin of the first device. The FL pin of the first device is tie...

· 0.5W27V

Vendor:COS   Package Cooled:DO-35   D/C:07+   

Description: Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Defense Supply Center, Columbus, ATTN: DSCC-VAC, P.O. Box 3990, Columbus, OH 43216-5000, by using the Standardization Document Improvement ...

Applications: The 0.5W27VA/0.5W27V75A/0.5W27V76A ensure that the output voltage does not swing negative when the input power is removed or when EN is driven low. The 0.5W27V75A/0.5W27V76A also allow prebias startup with- out discharging the output. The 0.5W27VA/0.5W27V75A/0.5W27V76A are available in a 24-...

Features: The 0.5W27V requires two power inputs. One input is employed to power the LCD electronics and to drive the voltages to drive the TFT array and liquid crystal. And the second input for the backlight CCFL, is typically generated by an inverter. The inverter is an external unit to the LCD.

· 0.5W27V-PHI

Vendor:HIT   Package Cooled:DO-35   D/C:07+   

Description:

Applications: 3. JA is measured in free air with the component mounted on a high effective thermal conductivity test board with direct attach features. JC, the case temp is measured at the center of the exposed metal pad on the package underside. See Tech Brief TB379.

Features: The 0.5W27V-PHI eliminates the need of complicated circuitry in voice playback but still achieves high voice quality. Sounds such as human speech, animal sounds, musical sounds and even special sound effects can be synthesized. Versatile combinations in sections achieve longer playback d...

· 0.5W3.1V

Description: 660 mW (Military) Synchronous and asynchronous output enables On-chip edge-triggered registers Buffered common PRESET and CLEAR inputs EPROM technology, 100% programmable Slim 300-mil, 24-pin plastic or hermetic DIP, 28-pin LCC, or 28-pin PLCC 5V 10% VCC, commercial and military TTL-com...

Applications: 128K x 36, 256K x 18 memory configurations Supports high performance system speed - 150 MHz (3.8 ns Clock-to-Data Access) ZBTTM Feature - No dead cycles between write and read cycles Internally synchronized output buffer enable eliminates the need to control OE Single R/W (READ/WRITE) contr...

Features: The hardware RESET# pin terminates any operation in progress and resets the device, after which it is then ready for a new operation. The RESET# pin may be tied to the system reset circuitry. A system reset would thus also reset the device, enabling the host system to read boot-up firmwa...

· 0.5W3.3V

Vendor:COS   Package Cooled:DO-35   D/C:07+   

Description: Notes: 1. Test conditions assume signal transition times of 5 ns or less, timing reference levels of 1.5V, input pulse levels of 0.4V to 2.2V and output loading specified in Figure 1. 2. Tested with the load in Figure 2. Transition is measured 500 mV from steady-state voltage. Not 100% te...

Applications: " Window structured high power laser diode ideal for high speed recording. " Recordable 24 speed + Readable 48 speed for CD-ROM / RW disks " Focus error signal detection : SSD method " Tracking error signal detection : 3-beam method " Fast response ( fc=65 MHz)

Features: Input/Output Capacitors: The 0.5W3.3V regulator requires a 100µF electrolytic capacitor at the input and output for proper operation in all applications. The ESR (equivalent series resistance) of both capacitors must be less than 250mΩ @100kHz. In addition, C1 and C 2 must be rated...

· 0.5W3.3V-PHI

Vendor:HIT   Package Cooled:DO-35   D/C:05+   

Description: NOTES: (1) With a balanced differential signal, the positive input is 180 out-of-phase with the negative input, therefore, the actual voltage swing about the common- mode voltage on each pin is 1.55V to achieve a total input range of 3.1V or 6.2Vp-p. (2) The A/D converter oversamples the rece...

Applications: PCM Output Register The decoded 8-bit parallel PCM data is loaded into an 8-bit parallel-to-serial output shift register with the falling edge of CE. The MSB data is shifted out with the leading edge of CE, and subsequent data are shifted out with the rising edges of PSCK while CE is hig...

Features: NPT IGBT technology Square RBSOA, no latchup Free wheeling diodes with Hiperfast and soft recovery behaviour Isolation voltage 2500 V~ Built in temperature sense High level of integration: one module for complete drive system Direct Copper Bonded Al2O3 ceramic base plate

· 0.5W3.6V

Description: When using R2 location for a dc current-shunt, please note that the pc- board copper traces which short out R1 can only carry currents up to 0.2A (200mA). However, dc currents up to 2A can be accommodated if a 20AWG jumper wire is soldered in location R1. Be sure R2 has a sufficient power rati...

Applications: a. Absolute maximum continuous ratings are those maximum values beyond which damage to the device may occur. Exposure to these conditions or conditions beyond those indicated may adversely affect device reliability. Functional operation at absolute-maximum-rated conditions is not implied.

Features: Note 6: The 0.5W3.6V is designed to maintain a port voltage of C46.6V to C57V and the VEE supply voltage range accounts for the drop across the diode, MOSFET and sense resistor. Note 7: The 0.5W3.6V implements overload current detection per IEEE 802.3af. The minimum overload current (ICUT) ...

· 0.5W3.9V

Vendor:COS   Package Cooled:DO-35   D/C:07+   

Description: Figure 12 shows a dual-trace photograph of a triangular signal being sampled-and-held for approximately 14ms with a 300pF storage capacitor. The center trace (expanded to 20mV/Div.) shows the worst-case tilt for all the steps shown in the upper trace. The total equivalent leakage current...

Applications: The FAN7382 is a monolithic half-bridge gate driver IC for driving MOSFETs and IGBTs, which operate up to +600V. Fairchilds high voltage process and common-mode noise canceling technique give stable operation of high-side driver under high dv/dt noise circumstances. Advanced level shift ...

Features: SIZEB determines the bus width of Port B. A HIGH on this pin selects byte (9-bit) bus size. A LOW on this pin selects word (18-bit) bus size. SIZEB works with SIZEC and BE to select the bus size and endian arrangement for ports B and C. The level of SIZEB must be static throughout device opera...

· 0.5W30V

Description: High FSK Sensitivity: -106 dBm at 20 kBaud/-109.5 dBm at 2.4 kBaud (433.92 MHz) High ASK Sensitivity: -112.5 dBm at 10 kBaud/-116.5 dBm at 2.4 kBaud (433.92 MHz) Low Supply Current: 10.5 mA in RX and TX Mode (3 V/TX with 5 dBm) Data Rate 1 to 20 kBaud Manchester FSK, 1 to 10 kBaud Manchester ...

Applications: The 0.5W30V uses bus cycles of 8 bits each for commands, data, and addresses to execute operations. The operation instructions are listed in the table below. All instructions are synchronized off a high to low transition of #CE. The first low to high transition on SCK will initiate the instru...

Features: The 0.5W30V has dedicated pins to indicate signal strength, carrier detect, and LOCK. Optional external resistors allow the carrier detect threshold level to be customized to the user's requirement. In addition, the 0.5W30V provides an 'Output Eye Monitor Test' (OEM_TEST) for diagnostic testi...

· 0.5W33V

Description: Hynix HYMP512S64MP8 series is designed for high speed and offers fully synchronous operations referenced to both rising and falling edges of differential clock inputs. While all addresses and control inputs are latched on the rising edges of the clock, Data, Data strobes and Write data masks i...

Applications: DATA BUS: The Data Bus lines are bidirectional three-state signals connected to the system data bus. The outputs are enabled in the Program condition during the I/O Read to output the contents of a register to the CPU. The outputs are disabled and the inputs are read during an I/O Write cyc...

Features: The TMS320C62x DSP offers cost-effective solutions to high-performance DSP programming challenges. The 0.5W33VB/03 has a performance of up to 2400 million instructions per second (MIPS) at 300 MHz, while the 0.5W33V has a performance of up to 2000 MIPS at 250 MHz, and the 0.5W33V has a per...

· 0.5W36V

Description: In applications where these voltage ratings could be exceeded, e.g. by transient signals induced into long buffered bus lines, Schottky diodes and 15 V zener diode clamps should be fitted between GND and the buffered bus pins as shown in Figure 7.

Applications: The MAX4599 successfully meets the quality and reliability standards required of all Maxim products. In addition, Maxims continuous reliability monitoring program ensures that all outgoing product will continue to meet Maxims quality and reliability standards.

Features: C Easy design iteration C In-system logic changes • Extensive Packaging Options C Over 20 different packages C Plastic and ceramic surface-mount and pin-grid- array packages C Thin and Very Thin Quad Flat Pack (TQFP and VQFP) options

· 0.5W4.3V

Vendor:COS   Package Cooled:DO-35   D/C:07+   

Description: Reduced parts count and high efficiency add to the reliability of the HPR10XX Series. The high efficiency of the HPR10XX Series means less internal power dissipation, as low as 190mW. With reduced heat dissipation the HPR10XX Series can oper- ate at higher temperatures with no degradation...

Applications: Four dedicated test pins control the operation of the test circuitry: test data input (TDI), test data output (TDO), test mode select (TMS), and test clock (TCK). Additionally, the test circuitry performs other testing functions such as parallel-signature analysis (PSA) on data inputs and p...

Features: NOTES 1Temperature range is as follows: B Version: C40C to +85C. 2Typical values are at 25C, unless otherwise stated. 3Guaranteed by design, not subject to production test. 4The digital switch contributes no propagation delay other than the RC delay of the typical R ON of the switch and th...

· 0.5W4.7V

Vendor:COS   Package Cooled:DO-35   D/C:07+   

Description: All digital clocks generate unwanted energy in their harmonics. Conventional digital clocks are square waves with a duty cycle that is very close to 50%. Because of this 50/50 duty cycle, digital clocks generate most of their harmonic energy in the odd harmonics, i.e., third, fifth, seven...

Applications: The 0.5W4.7V is an advanced CMOS dualCindependent DPDT (double poleCdouble throw) analog switch, fabricated with silicon gate CMOS technology. It achieves highCspeed propagation delays and low ON resistances while maintaining CMOS lowCpower dissipation. This DPDT controls analog and digi...

Features: The radiation hardened 0.5W4.7VRH is a low dropout adjustable negative regulator with an output voltage range of -2.25V to -26V. The device features a 1A output current capability, an adjustable current limit pin (ILIM) and a shutdown pin (SD) for easy on/off control.

· 0.5W5.1V

Vendor:COS   Package Cooled:DO-35   D/C:07+   

Description: The Am29BDS643 is a 64 Mbit, 1.8 Volt-only, simulta- neous Read/Write, Burst Mode Flash memory device, organized as 4,194,304 words of 16 bits each. This device uses a single VCC of 1.7 to 1.9 V to read, pro- gram, and erase the memory array. A 12.0-volt V PP may be used for faster prog...

Applications: This is the drain-source resistance at 25C with VGS = 10V. Since RDS(on) is temperature-dependent, it is important to minimize heating of the junction during the test. A pulse test is therefore used to measure this parameter. The test is set up in the following manner:

Features: Additional amplifiers are used in the 0.5W5.1V to provide the necessary control loop compensation for extended bandwidth. By extending the bandwidth of the direct duty cycle control system, torque pertubations can be accounted for while regulating the speed of the motor. This allows the mod...

· 0.5W5.6V

Vendor:COS   Package Cooled:DO-35   D/C:07+   

Description: Note 8: CIN, COUT, C1, and C2: Low-ESR Surface-Mount Ceramic Capacitors (MLCCs) used in setting electrical characteristics. Note 9: Output resistance is a model for the voltage drop at the output, resulting from internal switch resistance, capacitor ESR, and charge pump charge transfer chara...

Applications:

Features: The 0.5W5.6V includes a PCI bus interface and a codec. It also includes ADC and DAC conversion of modem/voice signal data and provide the interface and control logic needed to transfer data between its serial I/O terminals and the PCI interface. The 0.5W5.6V ADC and DAC operate synchronously s...

· 0.5W6.2V

Vendor:COS   Package Cooled:DO-35   D/C:07+   

Description: Data transfer may be initiated only when the bus is not busy. During data transfer, the data line must remain stable whenever the clock line is high. Changes in data line while the clock line is high will be interpreted as a START or STOP condition.

Applications: See Distribution of Differential Output Offset (Worst-Case Conditions) in the Typical Operating Characteristics. Characterized with a 675Mbps 1-0 pattern. Measurements are taken over an input signal range of 16dB. Deterministic jitter is defined as the arithmetic sum of PWD (pulse-width disto...

Features: The 0.5W6.2V is a low cost, high quality, 16-bit succes- sive approximation analog-to-digital converter. It uses laser-trimmed ICs and is packaged in a convenient 32-pin hermetic ceramic dual-in-line package. The converter is complete with internal reference, clock, comparator, and thin-...

· 0.5W6.8V

Description: The VRE3041 is a low cost, high precision 4.096V reference that operates from +10V. The device features a buried zener for low noise and excellent long term stability. Packaged in an 8 pin DIP and SMT, the device is ideal for high resolution data conversion systems.

Applications:

Features: The LT®1494/0.5W6.8V/0.5W6.8V are the lowest power (IS 1.5µA) op amps with precision specifications. The extremely low supply current is combined with excellent amplifier specifications: input offset voltage is 375µV maximum with a typical drift of only 0.4µV/C, input of...

· 0.5W7.5V

Description: Maxim/Dallas Semiconductor cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim/Dallas Semiconductor product. No circuit patent licenses are implied. Maxim/Dallas Semiconductor reserves the right to change the circuitry and specifications wit...

Applications: Modulation is applied to the VCO and is based on a transmission code where the baudrate is twice the bitrate (e.g. Manchester code ). 9600bps = 19200 baud 2Measured at 1200 bps and frequency deviation 10kHz (XCO modulation). The baudrate is equal to the bit rate. 3Tentative specification. ...

Features: The Harris 0.5W7.5V, 0.5W7.5V, logic gates utilize silicon gate CMOS technology to achieve operating speeds similar to LSTTL gates with the low power consumption of standard CMOS integrated circuits. All devices have the ability to drive 10 LSTTL loads. The 74HCT logic family is function...

· 0.5W8.2V

Vendor:COS   Package Cooled:DO-35   D/C:07+   

Description: • Well Defined Spatial Radiation Patterns • Viewing Angles: 6, 15, 23, 30 • High Luminous Output • Colors: 590 nm Amber 605 nm Orange 615 nm Reddish-Orange 626 nm Red • High Operating Temperature: TJ LED = +130C • Superior Resistance to Mo...

Applications: Ground pin. Complimentary clock of differential pair CPU outputs. These are current mode outputs. External resistors are required for voltage bias. True clock of differential pair CPU outputs. These are current mode outputs. External resistors are required for voltage bias. Supply for CP...

Features: The 0.5W8.2V is available in a 100-lead LQFP package and a 144-Ball Mini-BGA package. In order to maintain maxi- mum functionality and reduce package size and pin count, some serial port, programmable flag, interrupt and external bus pins have dual, multiplexed functionality. The external...

· 0.5W82K

Description: The ADSP-21365/6s, SRAM can be configured as a maximum of 96K words of 32-bit data, 192K words of 16-bit data, 64K words of 48-bit instructions (or 40-bit data), or combinations of different word sizes up to three megabits. All of the memory can be accessed as 16-bit, 32-bit, 48-bit, or 6...

Applications: 100KEP circuits are designed to meet the DC specifications shown in the above table after thermal equilibrium has been established. The circuit is in a test socket or mounted on a printed circuit board and traverse airflow greater than 500lfpm is maintained. Input and output parameters are ...

Features: 0.5W82KC-82AB 0.5W82KA11ANB-CUA-T2 0.5W82KA12ANB-CUB-T2 0.5W82KA13ANB-CUC-T2 0.5W82KA14ANB-CUD-T2 0.5W82KA15ANB-CUE-T2 0.5W82KA16ANB-CUF-T2 0.5W82KA17ANB-CUG-T2 0.5W82KA18ANB-CUH-T2 0.5W82KA19ANB-CUI-T2 0.5W82KA20ANB-CUJ-T2 0.5W82KA21ANB-CUK-T2 0.5W82KA22ANB-CUL-T2 0.5W82KA23ANB-CUM-...

· 0.5W9.1V

Vendor:COS   Package Cooled:DO35   D/C:07+   

Description: These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Winbond customers using or selling these products for use in such applications do so at their own risk and agre...

Applications: The TPS758xx family of 3-A low dropout (LDO) regulators contains four fixed voltage option regu- lators and an adjustable voltage option regulator. These devices are capable of supplying 3 A of output current with a dropout of 150 mV (TPS75833). Therefore, the device is capable of perfo...

Features: The 0.5W9.1V GaAs Power Amplifier MMIC has been especially developed for wireless applications in the 2.4 - 2.5 GHz ISM band (e.g. Bluetooth class 1). Its high power added efficiency and single positive sup- ply operation makes the device ideally suited to handheld applications. The device de...

· 0.6-2.5PF

Vendor:MFG   Package Cooled:4X4-2.5P   D/C:05+   

Description: The direction of counting is set by the watchdog or VCC over- and undervoltage detec- tion. If the VCC monitoring detects an undervoltage condition, the failure signal VCCL (VCC low voltage) is set and starts the up counter. If the VCC monitoring detects an overvoltage condition, the failur...

Applications: Internal to the GS4882 and GS4982 is a robust video signal detection circuit. This circuit provides a reliable control signal that will enable the sync separator outputs only when a valid video signal is present. When the input signal is not valid, the outputs are muted and stay in a logic hig...

Features: The 0.6-2.5PF is designed to operate with a V CC range of 2.7 to 3.6 Volts D.C. This allows operation in both 3 Volt 10% (battery operated) and 3.3 Volt 10% (power supply operated) systems. The propagation delay t PD is 5 ns slower at the lower voltage, but this is typically not an issue in ...

· 0.68UH

Vendor:N/A   Package Cooled:03+   D/C:N/A   

Description: Turn-On Time: In the circuit of Figure 1, turning Q1 on applies a low voltage to the STBY control (pin 3) and disables the regulator ouput. Correspondingly, turning Q1 off removes the low-voltage signal and enables the output. Once enabled, the output will typically experience a 10C15ms de...

Applications: The electronic switches on the device operate in a make before break mode when the wiper changes tap positions. If the wiper is moved several positions, multiple taps are connected to the wiper for tIW (INC to VW change). The RTOTAL value for the device can tem- porarily be reduced by a...

Features: The 0.68UH is a timing controller that combines an LVDS single pixel input interface with Nationals Reduced Swing Differential Signaling (RSDS™) output driver interface for (SVGA) XGA and Wide XGA resolutions. It resides on the TFT-LCD panel and provides the data buffering and contr...

· 0.8/CR

Vendor:NS   Package Cooled:SMD   D/C:08+   

Description: Software Data Protection The M28LV16 offers a software controlled write protection facility that allows the user to inhibit all write modes to the device including the Chip Erase instruction. This can be useful in protecting the memory from inadvertent write cycles that may occur due t...

Applications: The 0.8/CR device is available as a dual-band (EGSM900/DCS1800) front end or as a tri-band (EGSM900/DCS1800/PCS1900) front end for Global System for Mobile Communications (GSM) mobile telephony applications. Each device integrates all the required front-end components after the frequency pr...

Features: 0.8/CR is a photorelay and consists of a GaAs infrared emitting diode optically coupled to a photo−MOSFET in a 8−pin DIP package (DIP8). This photorelay has characteristics of low−on resistance when it turns on. It is suitable for 48 V power line on / off switches.

· 0.8-H3.75-30P-FEMALE

Description: Program memory can store both instructions and data, permit- ting the ADSP-21991 to fetch two operands in a single cycle, one from program memory and one from data memory. The DSP dual memory buses also let the embedded ADSP-219x core fetch an operand from data memory and the next instruc...

Applications: The FMS6346 Low Cost Video Filter (LCVF) provides 6dB gain (9dB optional, contact factory for further information) from input to output. In addition, the input will be slightly offset to optimize the output driver performance. The offset is held to the minimum required value to decrease t...

Features: CAUTION ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the human body and test equipment and can discharge without detection. Although the 0.8-H3.75-30P-FEMALE features proprietary ESD protection circuitry, permanent damage may ...

· 00.781.4868

Vendor:IC   Package Cooled:PLCC84   D/C:01+   

Description: Use the typical performance graphs as a guide for expected variations in current limit value with a given RCL and variations over temperature. The selected value of RCL must be added to the specified typical value of output resistance to calculate the total output resistance. Since the l...

Applications: The device performs store-and-forward of packets with full wire-speed transport capability. The built-in Committed Information Rate (CIR) controllers provide fractional bandwidth allocation up to the line rate in increments of 512kbps. The 00.781.4868 can operate with an inexpensive external ...

Features: The /RESET output is a simple open-drain N-channel MOS- FET structure. A pull-up resistor must be used to pull this output up to some voltage. For most applications, this voltage will be the same power supply that supplies VCC to the 00.781.4868. It is possible however to tie this resisto...

· 0000050G7261

Description: • Tri-State-Receiver Output, Weak Pull-up when in Shutdown Mode • High Efficiency Emitter • Baby Face (Universal) Package Capable of Surface Mount Soldering to Side and Top View Orientation • Eye safety class 1 (IEC60825-1, ed. 2001), limited LED on-time, LED...

Applications: INPUT LO: Direct output mode where CE/LD, HBEN, MBEN and LBEN act as inputs directly controlling byte outputs. If pulsed HI causes immediate entry into handshake mode (see Figure 13). If HI, enables CE/LD, HBEN, MBEN and LBEN as outputs. Handshake mode will be entered and data output as in ...

Features: The target MCU for the temperature display module is the MC68HC908EY16. As this MCU was not available at the time of writing, this application note employs an MC68HC908AZ60A. Implementation on an MC68HC908EY16 would significantly reduce the cost. Not only is the MC68HC908EY16 a lower pin-c...

· 000-00528

Vendor:CREATIVE   Package Cooled:PQFP-208   D/C:01   

Description: The TPS3803G15 device has a fixed-sense threshold voltage VIT set by an internal voltage divider, whereas the TPS3803C01 has an adjustable SENSE input that can be configured by two external resistors. In addition to the fixed sense threshold monitored at VDD, the TPS3805 devices provid...

Applications: This architecture allows the users software to make a data patch to the EPROM by indicating that a particular page or pages should be replaced with those indicated in the Page Address Redirection Bytes. To leave an authentic audit trail of data patches, it is recommended to also program th...

Features: Stresses above the ratings listed below can cause permanent damage to the 000-00528. These ratings, which are standard values for ICS commercially rated parts, are stress ratings only. Functional operation of the device at these or any other conditions above those indicated in the operational ...

· 0000097P8164

Vendor:IBM   Package Cooled:N/A   D/C:04+   

Description: PROTECTION SECTION Peak Current Limit Current Limit Delay Time(3) Thermal Shutdown Temperature(3) Shutdown Feedback Voltage Over Voltage Protection Shutdown Delay Current Leading Edge Blanking Time TOTAL DEVICE SECTION Operating Supply Current (control part only) Start-Up Charging Curren...

Applications: (VCC = +3.0V to +3.6V, CL = 10pF, differential input voltage |VID| = 0.2V to 1.0V, common-mode voltage VCM = |VID/2| to 2.4V - |VID/2|, input rise and fall time = 1ns (20% to 80%), input frequency = 100MHz, TA = -40C to +85C. Typical values are at VCC = +3.3V, VCM = 1.2V, |VID| = 0.2V, TA = +25...

Features: The 0000097P8164 programmable interval timer/counter megafunction is a high-performance device, which is designed to solve the common timing control problems in microcomputer system design. It provides three independent 16-bit counters, and each counter may operate in a different mode. All mo...

· 00000H4760

Vendor:IBM   Package Cooled:BGA   D/C:02+   

Description: The LH1556FP is robust, ideal for telecom and ground fault applications. It contains two SPST nor- mally open switches (1 Form A) that replace electro- mechanical relays in many applications. It is constructed using a GaAs LED for actuation control and an integrated monolithic die for t...

Applications: In ringing mode (Ring relay in position 2), the only protection device involved is the CLP30-200B1. In normal conditions, the CLP30-200B1 operates in region 1 of A1 curve, and is idle. If an overvoltage occurring between TIP (or RING) and GND reaches the internal overvoltage reference ...

Features: The decoder detects the end of a frame when the normal mid-bit transition on the differential input ceases Within one and a half bit times after the last bit carrier sense is de-as- serted Receive clock stays active for five more bit times before it goes low and remains low until the next...

· 0000915.567.

Vendor:11   Package Cooled:NSC   D/C:00+   

Description: This document is a general product description and is subject to change without notice. Hynix Electronics does not assume any responsibility for use of circuits described. No patent licenses are implied. Rev.04 / Oct.01Hynix Semiconductor

Applications: 3. Measured by the voltage drop between A and B pins at the indicated current through the switch. On Resistance is determined by the lower of the voltages on the two (A or B Ports). 4. Parameter is characterized but not tested in production. 5. DRON = RON max − RON min measured at i...

Features: The 0000915.567. encodes incoming data into quad-bits represented by 16 possible signal points with specific phase and amplitude levels. The base-band signal is then filtered to reduce intersymbol interference on the band limited telephone network. The modulator transmits this encoded data us...

· 0000915.568.

Vendor:65   Package Cooled:NSC   D/C:00+   

Description: This new series of digital transistors is designed to replace a single device and its external resistor bias network. The BRT (Bias Resistor Transistor) contains a single transistor with a monolithic bias network consisting of two resistors; a series base resistor and a baseCemitter resis...

Applications: GENERAL DESCRIPTION The hs2k219 is high speed ic types are frequency modulator. fabricated withsilicon gate CMOS technology . It achieves the high speed operation similar to equivalent LSTTL while maintaining the CMOS low power dissipation. all inputs are equipped with protection circuits...

Features: † Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. E...

· 0000915.569.

Vendor:40   Package Cooled:NSC   D/C:00+   

Description: These electrically erasable programmable memo- ry (EEPROM) devices are accessed by a high speed SPI-compatible bus. The memory array is organized as 2048 x 8 bit (M95160), and 1024 x 8 bit (M95080). The device is accessed by a simple serial interface that is SPI-compatible. The bus sig...

Applications: D0 - D4 (DAC Digital Input Control Codes): These are the DAC digital input control codes, with D0 representing the least significant bit (LSB) and D4, the most significant bit (MSB) as shown in Table 1. A bit is set low by being connected to GND. A bit is set high by floating it, or conne...

Features: With the trigger set at the midpoint of the rising edge, a histogram of the horizontal deviation of the first rising edge from the trigger point is constructed. The peak to peak distribution and standard deviation (Sigma or RMS) is derived from this histogram. This is the "measured&quo...

· 0000915.574.

Vendor:24   Package Cooled:NSC   D/C:00+   

Description: In an effort to provide up-to-date information to the customer regarding the status of any given device, Motorola has classified all devices into three categories: Preferred devices, Current products and Not Recommended for New Design products.

Applications: The 0000915.574. DC DC converter is intended for use in LAN applications as a power supply for the DP8392 Coaxial Transceiver The converter may be operated from an input voltage of 5V (g10%) to 15V It provides an isolated output of b9V for loads of up to 180 mA with an efficiency of 78% (...

Features: • Instruction system best suited to controller • Wide choice of data types (bit, byte, word, and long word) • Wide choice of addressing modes (23 types) • Enhanced multiply-divide instructions and RETI instructions • Enhanced high-precision computing with ...

· 0000915.576.

Vendor:60   Package Cooled:NSC   D/C:00+   

Description: Features • Hole-less TO-247 package for clip mounting • High frequency IGBT and anti-parallel FRED in one package • Low VCE(sat) - for minimum on-state conduction losses • MOS Gate turn-on - drive simplicity • Fast Recovery Epitaxial Diode (FRED) - soft rec...

Applications: Both parts operate from a single +3.3V supply and con- sume 93mW. The 0000915.576./0000915.576. are in a compact 30-mil x 50-mil die and require no external compensa- tion capacitor. A space-saving filter connection is pro- vided for positive bias to the photodiode through an on-chip 580͐...

Features: The EEPROM of the 0000915.576. contains 256 bytes. Bytes 00h to F7h are general-purpose user memory. The next three bytes, F8h, F9h, and FAh, contain the wiper settings for each of the potentiometers (see Table 1). The last five bytes, FBh to FFh, are reserved and should not be used.

· 0000915.578.

Vendor:38   Package Cooled:NSC   D/C:00+   

Description: Fully static operation and Tri-state outputs TTL compatible inputs and outputs Low power consumption Battery backup(L/LL-part) - 2.0V(min) data retention • Standard pin configuration - 32pin 525mil SOP - 32pin 400mil TSOP-II (Standard and Reversed)

Applications: • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, wh...

Features: tion in multiple bus microprocessor systems. An addi- tional feature of the 0000915.578. is its ability to enter the standby mode whenever the chip enable (CE/CE) is in- active, thus reducing current consumption to below 60mA. The combination of these functions makes the chip suitable for hig...

· 0000915.579.

Vendor:25   Package Cooled:NSC   D/C:00+   

Description: FEATURES 12-Bit Dual Muxed Port DAC 300 MSPS Output Update Rate Excellent SFDR and IMD Performance SFDR to Nyquist @ 25 MHz Output: 69 dB Internal Clock Doubling PLL Differential or Single-Ended Clock Input On-Chip 1.2 V Reference Single 3.3 V Supply Operation Power Dissipation: 155 mW ...

Applications: The 0000915.579. is a Non-Punch Through (NPT) IGBT design. This is a new member of the MOS gated high voltage switching IGBT family. IGBTs combine the best features of MOSFETs and bipolar transistors. This device has the high input impedance of a MOSFET and the low on- state conduction ...

Features: Electrical and Optical Specifications Specifications hold over the recommended operating conditions unless otherwise noted. Unspecified test conditions can be anywhere in their operating range. All typical values are at 25˚C and 3.0 V unless otherwise noted. ParameterSymbol Min.Typ. Max...

· 0000915.582.

Vendor:1013   Package Cooled:NSC   D/C:00+   

Description: The Fujitsu MB15F72UL is a serial input Phase Locked Loop (PLL) frequency synthesizer with a 1300 MHz and a 350 MHz prescalers. A 64/65 or a 128/129 for the 1300 MHz prescaler, and a 8/9 or a 16/17 for the 350 MHz prescaler can be selected for the prescaler that enables pulse swallow operat...

Applications: - Single 10V to 40V Supply Application - 1.25V + 2.0% Voltage Reference. - Virtual Frequency ControlTM. - Fast transient response. - Synchronous operation for high efficiency - Current limit function. - Small size with minimum external components - Soft Start and Shutdown functions - Indus...

Features: The 0000915.582. drives, regulates and monitors the main switch- ing element in a SMPS based on the nonsynchronous flyback theory. Because of the wide regulating range and the high voltage stability during large load changes, the power sup- plies for TV receivers and video recorders can b...

· 0000915.589.

Vendor:10   Package Cooled:NSC   D/C:00+   

Description: Resistor Terminal A1 Wiper Terminal W1 Resistor Terminal B1 Positive power supply, specified for opera- tion from 2.2 V to 5.5 V. Active low, asynchronous connection of Wiper W to Terminal B, and open circuit of Terminal A. RDAC register contents unchanged. SHDN should tie to VDD if no...

Applications: (0000915.589.A EV kit, VCC = +3.0V, VGC = +2.15V, RXEN = TXEN = low, all measurements performed in 50Ω environment, fLO = 1.5GHz, PLO = -10dBm, fLNAIN = fPADRIN = fRX0000915.589.XIN = 1.9GHz, PLNAIN = -32dBm, PPADRIN = PRX0000915.589.XIN = -22dBm, fIF, IF = 4000000915.589.Hz, PIF = -32dBm ...

Features: The 0000915.589. is the single-ended output type receiver for 622 Mb/s 1.3 µm short and medium haul communication systems incorporated with InGaAs PIN photo diode and Si Preamp. Optical signal is launched into the non-hermetic Mini-DIL package through SMF pig tail.

· 0000915.595.

Vendor:5   Package Cooled:NSC   D/C:00+   

Description: The operation mode of the M5M51008C series are determined by a combination of the device control inputs S1,S2,W and OE. Each mode is summarized in the function table. A write cycle is executed whenever the low level W overlaps with the low level S1 and the high level S2. The address mus...

Applications: The Receive analog power amplifier output, capable of driving load impedances as low as 300Ω (depending on the peak overload level required). PCM data received on the assigned DR pin is decoded and appears at this output as voice frequency signals.

Features: In central office, servers and other infrastructure systems, a common backplane dc supply is reduced to multiple board supplies using dc/dc converters. These multiple supplies are used to power different sections of the board (eg) 3.3V Logic circuits, 5V logic circuits, DSP core and I/O ...

· 0000915.597.

Vendor:55   Package Cooled:NSC   D/C:00+   

Description: Device Protocol The X76F102 supports a bidirectional bus oriented pro- tocol. The protocol defines any device that sends data onto the bus as a transmitter and the receiving device as a receiver. The device controlling the transfer is a master and the device being controlled is the...

Applications: Register usage rules influence placement of input and results within the computational units. For most operations, the data registers of the computational units act as a data register file, permitting any input or result register to provide input to any unit for a computation. For feedback...

Features: This example program is a function written in generic C. So it should work with any C compiler. According to the return code the functions for Flash programming in CPU programming mode should be selected. These functions can be derived for example from the appropriate bootloader programs.

· 0000915.599.

Vendor:8   Package Cooled:NSC   D/C:00+   

Description: Copyright © 2005 Integrated Silicon Solution, Inc. All rights reserved. ISSI reserves the right to make changes to this specification and its products at any time without notice. ISSI assumes no liability arising out of the application or use of any information, products or services desc...

Applications: • VCC = 2.3V to 3.6V • Hysteresis on all inputs • Typical VOLP (Output Ground Bounce) < 0.8V at VCC = 3.3V, TA = 25C • Typical VOHV (Output VOH Undershoot) < 2.0V at VCC = 3.3V, TA = 25C • Bus Hold retains last active bus state during 3-STATE, eliminating...

Features: DESCRIPTION The 0000915.599.B is a monolithic integrated circuit, available in 16-lead dual-in-line plastic package and plastic micro packages. The 0000915.599.B have a chain of 24 flip-flops with an input circuit that allows three modes of operation. The input circuit functions as a c...

· 0001-003-01

Vendor:TELENEX   Package Cooled:PLCC   D/C:99   

Description: In operation, the HCPL-7860/ HCPL-786J Isolated Modulator (optocoupler with 3750 VRMS dielectric withstand voltage rating) converts a low- bandwidth analog input into a high-speed one-bit data stream by means of a Sigma-Delta (− ∆) over-sampling modulator. This modulation prov...

Applications: - Removed all references to XCLKS, since function is removed. - typo - replaced PRU with RPU. - typo - replaced ATAHC with ATA5HC - Removed references to clock monitor, since function is not available. - Update JA for 100-pin and 64-pin packages. - Add footnotes on IRQ pin removal in 6...

Features: MUTE Operation The MUTE input is active high. Whenever the input is low, the VOUT will reflect the value in the data register. If MUTE is driven high the VOUT outputs will be switched to VREFL. Releasing the MUTE input returns the VOUT outputs to the analog equivalent of the data registe...

· 00011-1

Vendor:QFP-32   Package Cooled:SUNDISK   D/C:2004+   

Description: BYTE/WORD PROGRAMMING: Once a memory block is erased, it is programmed (to a logi- cal 0) on a byte-by-byte or on a word-by-word basis. Programming is accomplished via the internal device command register and is a four-bus cycle operation. The device will automati- cally generate the requir...

Applications: C Language Compiler. A C language compiler is available that supports Cypress MicroSystems PSoC family devices. Even if you have never worked in the C language before, the product quickly allows you to create complete C programs for the PSoC family devices.

Features: A computers RS232 transmit signal can be directly connected to this pin from the RS232 line as long as a current limiting resistor (typically about 47KΩ) is installed in series. (Internal protection diodes will pass the resistor current safely to the supply connections, protecting...

· 000-1900-007

Vendor:APT   Package Cooled:03+   D/C:18   

Description: To make Flash memories interchangeable and to encourage adoption of new Flash technologies, major Flash memory suppliers developed a flex- ible method of identifying Flash memory sizes and configurations in which all necessary Flash device parameters are stored directly on the device. ...

Applications: The 000-1900-007 Schottky rectifier has been expressly designed to meet the rigorous requirements of hi-rel environments. It is packaged in the hermeticly isolated TO-254AA package. The device's forward voltage drop and reverse leakage current are optimized for the lowest power loss and...

Features: Address, active High. In Word mode, these 18 inputs select one of 262,144 (256K) words within the array for read or write operations. In Byte mode, these Inputs inputs are combined with the DQ15/A-1 input (LSB) to select one of 524,288 (512K) bytes within the array for read or write...

· 0-002

Description: The HYM532810C M-Series is a 8Mx32-bit Fast Page mode CMOS DRAM module consisting of sixteen HY5117400C in 24/26 pin SOJ on a 72 pin glass-epoxy printed circuit board. 0.1µF and 0.01µF decoupling capacitors are mounted for each DRAM. The HYM532810CM is Tin plated and HYM532810CMG ...

Applications: Tiny SOT−353 and SOT−553 Packages Extremely High Speed: tPD 2.5 ns (typical) at VCC = 5.0 V Designed for 1.65 V to 5.5 V VCC Operation, CMOS Compatible Over Voltage Tolerant Inputs VIN may be Between 0 and 7.0 V for VCC Between 0.5 and 5.4 V TTL Compatible − Interface Capabi...

Features: These amplifiers have a 360-µV input offset voltage, a 17 nV/Hz input noise voltage, and a 2-pA input bias current for measurement, medical, and industrial applications. The TLV277x family is also specified across an extended temperature range (C40C to 125C), making it useful for auto...

· 0002/

Vendor:AMTJ   Package Cooled:SOP8M   D/C:2007+   

Description: WRITE Write operations are initiated by taking CS LOW and clocking in a start bit followed by the write command and the address of the data register to be written. This action is followed by the host clocking eight bits of data into the register, MSB first. The output of the selected DAC...

Applications: This device uses a two-step flash architecture to maintain low power consumption at high conversion rates. The input circuitry of the XRD8785 includes an on-chip S/H function which allows the user to digitize analog input signals between AGND and AVDD. Careful design and chip layout hav...

Features: Operating voltage range: 4.5V to 5.5V CMOS technology for low power consumption 6502 8-bit CMOS CPU core 8 MHz operation frequency 32K bytes of OTP (one time programming) ROM 512 bytes of RAM One 8-bit base timer 13 channels of 8-bit PWM outputs with 5V open drain 4 channel A/...

· 0002A

Description: Life Test: EIA RS-198D, Method 201, Condition D. Test Potential and Temperature. C0G- 200% of rated voltage at + 125C X7R - 200% of rated voltage at + 125C Z5U - 200% of rated voltage at + 85C Post-Test Limits at + 25C are: Capacitance Change: C0G - 3%, or 0.25 pF, whichever ...

Applications: OPA688UThis VLA™ (Voltage Limiting Amplifier) has two inputs (VH and VL in Table I), which limit the output voltage swing. Table XI shows different ways to set up pin 5s and pin 8s voltages using R8 - R13 and C5 - C7. Use Table IV for the other components.

Features: 1. ISL4238E input pins incorporate positive feedback resistors. Once the input is driven to a valid logic level, the feedback resistor maintains that logic level until VCC is removed. Unused transmitter inputs may be left unconnected by the user.

· 0003-5

Description: Notes: 1. Derate above 91C at 0.53 mA/C. 2. See Figure 4 to establish pulsed conditions. 3. Derate above 53C at 0.45 mA/C. 4. Derate above 80C at 0.38 mA/C. 5. See Figure 5 to establish pulsed conditions. 6. Derate above 81C at 0.52 mA/C. 7. See Figure 6 to establish pulsed ocndition...

Applications: Clocks in the ispLSI 2096VL device are selected using the dedicated clock pins. Three dedicated clock pins (Y0, Y1, Y2) or an asynchronous clock can be selected on a GLB basis. The asynchronous or Product Term clock can be generated in any GLB for its own clock.

Features: The 0003-5 provides 113 product terms to drive the 8 OR functions. These product terms are distributed among the outputs in groups of 8, 10, 12, 14, and 16 to form logical sums (see Figure 15). This distribution allows optimum use of the device resources.

· 0003L-5

Description: Agilent Technologiess IAM-92516 is a high linearity GaAs FET Mixer using 0.5 µm enhancement mode pHEMT technology. This device houses in Pb-free and Halogen free 16 pins LPCC 3x3[2] plastic package. The IAM-92516 has built- in LO buffer amplifier which requires -3 dBm LO power to de...

Applications: * Wide operating voltage range(VDD=2.2V ~ 5.0V) * CMOS structure assures extremely low power dissipation * Mulitiple keying is possible * Less external parts * Adaptable to other Models as Code Bits are available * An oscillator can be constructed only by connecting an LC or Ceramic R...

Features: * Constant Current Output : can setup all output current with one resistor for 5 to 90mA. * Maximum Clock Frequency : fCLK = 25 (MHz) (Cascade Connect Operate, Topr = 25oC) * 5V CMOS Compatible Input * 16 pin DIP, SOP or SSOP package * Constant Output Current Matching :

· 0003L-9

Description: The NE5534 and NE5534A are high-performance operational amplifiers combining excellent dc and ac characteristics. Some of the features include very low noise, high output-drive capability, high unity-gain and maximum-output-swing bandwidths, low distortion, and high slew rate.

Applications: The Erase Suspend/Erase Resume feature allows the host system to pause an erase operation in a given sector to read or program any other sector and then complete the erase operation. The Program Suspend/Program Resume feature enables the host system to pause a program operation in a given...

Features: If the instruction preceding the REF has a redundancy effect, this effect is cancelled and the referenced instruction is not skipped. If the instruction following the REF has a redundancy effect, the instruction following the REF is skipped.

· 0003SCFEA

Vendor:MOT   Package Cooled:SOP   D/C:07/08+   

Description: Copyright © 2002 Integrated Silicon Solution, Inc. All rights reserved. ISSI reserves the right to make changes to this specification and its products at any time without notice.ISSI assumes no liability arising out of the application or use of any information, products or services descr...

Applications: The bq2085 SBS-compliant gas gauge IC for battery pack or in-system installation maintains an accurate record of available charge in Li-ion or Li-polymer batteries. The bq2085 monitors capacity and other critical parameters of the battery pack and reports the information to the system h...

Features: An optional default descriptor can be used to simplify enumer- ation. Only the Vendor ID (VID), Product ID (PID), and Device ID (DID) need to be loaded by the SX2 for it to enumerate with this default set-up. This information is either loaded from an EEPROM in the case when the presence o...

· 000-6181-37R

Description: This combination of excellent dc performance with a common-mode input voltage range that includes the negative rail makes these devices the ideal choice for low-level signal conditioning applications in either single-supply or split-supply configurations. In addition, these devices offer ph...

Applications: 96 Outputs Plasma Display Driver 90V Absolute Maximum Rating Reduced EMI (Electro Magnetic Interference) 3.3V / 5V Compatible Logic -40 / 30 mA Source / Sink Output Mos 6 Bit Data Bus (40 MHz) BCD Process Packaging Adapted to Customer Request (DICE, COB, COF, TAB).

Features: Low-power operation makes the 000-6181-37R ideal for bat- tery-operated systems, such as personal digital assis- tants with resistive touch screens and other portable equipment. The 000-6181-37R is available in 16-pin QSOP and TSSOP packages, and is guaranteed over the -40C to +85C temperatur...

· 000-7044-37R

Description: RAMP: A resistor (R4) from RAMP to the input voltage and a capacitor (CR) from RAMP to GND programs the feedforward ramp signal. RAMP is discharged to GND when CLK is high and allowed to charge when CLK is low. RAMP is the line feedforward sawtooth signal for the PWM comparator. Assuming...

Applications: 3: Regulation is measured at a constant junction temperature using low duty cycle pulse testing. Load regulation is tested over a load range from 0.1 mA to the maximum specified output current. Changes in output voltage due to heating effects are covered by the thermal regulation specific...

Features: CAUTION ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the human body and test equipment and can discharge without detection. Although the 000-7044-37R features proprietary ESD protection circuitry, permanent damage may occur on ...

· 000-7074-204-13-A002

Vendor:TQFP   Package Cooled:11   D/C:GLOBESPAN   

Description: In addition to data polling, the W29EE512 provides another method for determining the end of a program cycle. During the internal programming cycle, any consecutive attempts to read DQ6 will produce alternating 0's and 1's. When the programming cycle is completed, this toggling between 0's a...

Applications: These N-Channel enhancement mode power field effect transistors are produced using Fairchilds proprietary, planar, DMOS technology. This advanced technology has been especially tailored to minimize on-state resistance, provide superior switching performance, and withstand high energy pulse in...

Features: The 000-7074-204-13-A002B-xx is a dot matrix LCD controller which is fabricated in low power CMOS silicon gate technology. Character display on the dot matrix character type LCD can be controlled in combination with a 4-bit/8-bit microcontroller. This LSI consists of 16-dot COMMON driver, 40...

· 000-7093-37R

Vendor:1607   Package Cooled:MIDCOM   D/C:03+   

Description: Several register bits (bit 0 to bit 93) are used to control circuit operation and to adapt certain circuit parameters to the specific application. The control bits are organized in two 8-bit and three 24-bit registers that can be programmed by the 3-wire bus protocol. The bus protocol and t...

Applications: Specifications shown in boldface are tested on all production units at final electrical test. Results from those tests are used to calculate outgoing quality levels. All min and max specifications are guaranteed, although only those shown in boldface are tested on all production units.

Features: A basic, two-dimensional 000-7093-37R-based system is shown in Figure 2. In this typical arrangement, two Image Manipulation Sequencers process the image. 000-7093-37Rhe only other components needed beyond the source and target image buffer memories are a multiplier-accumulator or pixel in...

· 000-7113-31R

Vendor:MIDCOM   Package Cooled:SMD   D/C:01+   

Description: This document contains ADVANCE INFORMATION. ISSI reserves the right to make changes to its products at any time without notice in order to improve design and supply the best possible product. We assume no responsibility for any errors which may appear in this publication. © Copyright 199...

Applications: DigitalClarity™ Image Sensor Technology High frame rate Global Reset Release Horizontal and vertical binning Column and row skip modes Superior low-light performance Low dark current Simple two-wire serial interface Programmable Controls: Gain, frame rate, frame size, exp...

Features: The 000-7113-31R is a bipolar integrated circuit for use in mono portable and pocket radios. It is used when a minimum of perpheral components (of small dimensions and low costs) is important. The circuit contains a frequency-locked-loop(FLL) system with an intermediate frequency(IF) of a...

· 000-7120-37R

Vendor:WUR   Package Cooled:0723   D/C:175   

Description: The amplitude of the triangle waveform decreases slightly with temperature. The typical amplitude coefficient is -0.01%/oC, giving a drop of about 1% at 125oC. The sine output is less sensitive and decreases only about 0.6% at 125oC. For the square wave output the VCE(SAT) goes from...

Applications: The ISD1000A devices drive a speaker directly through differential outputs. This boosts power by four times and eliminates the need for a series capacitor or an output amplifier. The device will operate from a single power supply or from batter- ies. The device also includes a power down func...

Features: The programmable telephone audio processor 000-7120-37R is a linear integrated circuit for use in feature phones, answering machines, fax machines and cordless phones. It contains the speech circuit, tone-ringer interface with DC/DC converter, sidetone equivalent and ear-protection recti...

· 000802-01

Vendor:BGA   Package Cooled:169   D/C:LSI   

Description: 1708.30 1409.80 1281.80 1150.00 1022.00 890.20 762.20 630.40 502.40 370.60 242.60 110.80 -17.20 -149.00 -277.00 -408.80 -536.80 -668.60 -796.60 -928.80 -1056.80 -1189.00 -1375.40 -1515.40 -1651.00 -1599.90 -1599.90 -1599.90 -1599.90 -1600.00 -1600.00 -1600.00 -1600...

Applications: Reduced Power Consumption C 1.8 V Core Operation With 3.3 V I/Os and Supplies2 Reduced Ground Bounce Using Time Staggered Pixel Outputs Lowest Noise and Best Power Dissipation Using TI PowerPAD Packaging Advanced Technology Using TI 0.18-µm EPIC-5 CMOS Process TFP401A...

Features: NOTES: • Use a 0.1 µF capacitor on VDD to decouple the power source. • Physical coupling distance of the accelerometer to the microcontroller should be minimal. • Place a ground plane beneath the accelerometer to reduce noise, the ground plane should be attached t...

· 0008BA

Description: • Power-on Reset (POR), Power-up Timer (PWRT), and Oscillator Start-up Timer (OST) • Watchdog Timer (WDT) with its own on-chip RC oscillator • Programmable code protection • Power saving SLEEP mode • Selectable oscillator options, including: - 4X Phase ...

Applications: VRBS and VRT to VRTS, or provide external reference voltages to the VRB and VRT pins. The internal reference generates 0.6V at VRB and 2.6 V at VRT. Providing external reference voltages allows easy interface to any input signal range between AGND and AVDD. This also allows the system t...

Features: *Stresses above those listed under Absolute Maximum Ratings may cause perma- nent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. E...

· 000H10IED

Description: Two separate analog receiver channels Converts ARINC 429 levels to serial data Built-in TTL compatible complete channel test inputs TTL and CMOS compatible outputs Low power dissipation Internal bandgap Short circuit protected Available in 20-Lead ceramic DIP

Applications: *This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operation sections of this specifica- tion is not implied. Exposure to absolute maximum rating conditions for extended periods of time may affect reliability.

Features: 000H10IED/000H10IED Device Features • CDMA2000 1X Mobile Station Modem chipset compatibility • Full direction down conversion RF to baseband • Full international cellular band operation support in Japan, China, India, Latin America, Korea and the United States C GPS m...

· 000M

Description: Maximum / minimum signal levels The following table gives the transmitted and re- ceived signal levels for both ATU-R and ATU-C sides. All the levels are referred to the line volt- ages (i.e. after hybrid and transformers in TX di- rection, before hybrid and transformer in RX di- rectio...

Applications: Continuous Power Dissipation (TA = +25C) SOT23-5.....520 mW Operating Temperature Range...-40C to +85C Junction Temperature.+150C (1)JA .........240C/Watt Storage Temperature Range.-65C to +160C Lead Temperature (soldering, 10sec)..+300C

Features: The Hynix 000M Series are Dual In-line Memory Modules suitable for easy interchange and addition of 128Mbytes memory. The Hynix 000M Series are fully synchronous operation referenced to the positive edge of the clock . All inputs and outputs are synchronized with the rising edge of the clock ...

· 0010603-2

Description: NOTES: 1. Dimensions are in inches. Lead 1 is emitter, lead 2 is base, and lead 3 is collector. 2. Metric equivalents are given for general information only. 3. Symbol TL is measured from HD maximum. 4. Details of outline in this zone are optional. 5. Leads at gauge plane .054 +.001 ...

Applications: • Low power consumption: STANDBY - 72 µW max at 3.6V - 41 µW max at 2.7V • 1.2V data retention • Equal access and cycle times • Easy memory expansion with CS, OE inputs • Smallest footprint packages - 48-ball FBGA - 400-mil 44-pin TSOP II ...

Features: The 0010603-2USB is an 8 port USB hub with 1 upstream port and 7 downstream ports. It uses an 8-bit RISC-like uC to encode/decode the host commands. The 0010603-2USB is designed mainly for stand-alone hub and can also be integrated in PC mo therboard or any other devices to support USB hub f...

· 0010A01

Description: The e5130 contains 4 independent driver outputs with an ON resistance of typically 25 W (15 W) for the P-channel output transistors and typically 20 W (13 W) for the N-channel output transistors at a supply voltage of 1.5 V (3 V). To obtain a fast transi- tion of the outputs even for slow r...

Applications: A buffered output-enable (OE) input can be used to place the eight outputs in either a normal logic state (high or low) or a high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and the increased driv...

Features: The MOC306X-M and MOC316X-M devices consist of a GaAs infrared emitting diode optically coupled to a monolithic silicon detector performing the function of a zero voltage crossing bilateral triac driver. They are designed for use with a triac in the inter- face of logic systems to equipment...

· 001154V121

Description: Operating and Storage temperature: -65ºC to +175ºC Thermal Resistance: 150ºC/W junction to end cap and 300ºC/W junction to ambient when mounted on FR4 PC board (1 oz Cu) with recommended footprint (see last page) Steady-State Power: 0.5 watts at end cap temperature TEC ...

Applications: When the voltage of the battery cell goes below the overdischarge protection voltage (V ODP) beyond the overdischarge delay time (TOD ) period, discharging is inhibited by the turning-off of the discharge control MOSFET M1. The overdischarge delay time defaults to 100mS. Inhibition of dischar...

Features: The HSMP-386x series of general purpose PIN diodes are designed for two classes of applications. The first is attenuators where current consumption is the most important design consideration. The second application for this series of diodes is in switches where low capacitance is the dr...

· 0013IGC

Description: The HYM71V75S1601 H-Series are Dual In-line Memory Modules suitable for easy interchange and addition of 128Mbytes memory. The HYM71V75S1601 H-Series are offering fully synchronous operation referenced to a positive edge of the clock. All inputs and outputs are synchronized with the rising ed...

Applications: Charge in Li-Ion and Li-Polymer Batteries Supports the Smart Battery Specification (SBS) V1.1 Works With the TI bq29311 Analog Front End (AFE) Protection IC to Provide Complete Pack Electronics for 10.8-V or 14.4-V Battery Packs With Few External Components Based on a Powerful Low-Power RIS...

Features: The 0013IGC is a true single-chip quad Ethernet interface solution, incorporating all analog and digital circuitry needed for a complete Ethernet front end circuit. It includes high-performance on- chip filtering, eliminating the need for external filters. In addition, the 0013IGC suppo...

· 0014GCP

Description: The Hitachi 0014GCP Series is 1-Mbit static RAM organized 131,072-kword 8-bit. 0014GCP Series has realized higher density, higher performance and low power consumption by employing Hi-CMOS process technology. The 0014GCP Series offers low power standby power dissipation; therefore, it is su...

Applications: See the last page of this specification for Group A subgroup testing in formation. These are absolute values with respect to device ground. All over shoots due to system or tester noise are included. Not more than one output should be tested at a time. Duration of the short circuit should not...

Features: . . . designed for amplifier applications in 50 to 100 ohm systems requiring wide bandwidth, low noise and low distortion. This hybrid provides excellent gain stability with temperature and linear amplification as a result of the pushCpull circuit design.

Pages: 1101/12185  At 10 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 Under 10

Quick Search Part No.

Home About Us Map Online Inquiry
© 2009-2011 ExchangeIC.com Corp.All Rights Reserved